一、安装mysql软件

下载并安装MySQL官方的Yum Repository,Mysql版本8.0.20

wget -i -c http://dev.mysql.com/get/mysql80-community-release-el7-3.noarch.rpm

下载后直接yum安装

yum -y install mysql80-community-release-el7-3.noarch.rpm

安装MySQL服务器

yum -y install mysql-community-server

[root@CentOS Linux]# yum -y install mysql-community-serverLoaded plugins: fastestmirror, langpacksLoading mirror speeds from cached hostfile * base: mirror.lzu.edu.cn * extras: mirror.lzu.edu.cn * updates: mirror.lzu.edu.cnmysql-connectors-community| 2.5 kB 00:00:00mysql-tools-community | 2.5 kB 00:00:00mysql80-community| 2.5 kB 00:00:00(1/3): mysql-connectors-community/x86_64/primary_db| 57 kB 00:00:00mysql-tools-community/x86_64/p FAILED B 00:51:07 ETA http://repo.mysql.com/yum/mysql-tools-community/el/7/x86_64/repodata/12bd1e8730cd532791529877bf5e7babbbb02879-primary.sqlite.bz2: [Errno 12] Timeout on http://repo.mysql.com/yum/mysql-tools-community/el/7/x86_64/repodata/12bd1e8730cd532791529877bf5e7babbbb02879-primary.sqlite.bz2: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds')Trying other mirror.(2/3): mysql-tools-community/x86_64/primary_db | 72 kB 00:00:00mysql80-community/x86_64/prima FAILED B 00:00:15 ETA http://repo.mysql.com/yum/mysql-8.0-community/el/7/x86_64/repodata/833c637b3989c2dd5a079a045177d2f1c96e9c1e-primary.sqlite.bz2: [Errno 12] Timeout on http://repo.mysql.com/yum/mysql-8.0-community/el/7/x86_64/repodata/833c637b3989c2dd5a079a045177d2f1c96e9c1e-primary.sqlite.bz2: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds')Trying other mirror.(3/3): mysql80-community/x86_64/primary_db| 107 kB 00:00:00Resolving Dependencies--> Running transaction check---> Package mysql-community-server.x86_64 0:8.0.20-1.el7 will be installed--> Processing Dependency: mysql-community-common(x86-64) = 8.0.20-1.el7 for package: mysql-community-server-8.0.20-1.el7.x86_64--> Processing Dependency: mysql-community-client(x86-64) >= 8.0.11 for package: mysql-community-server-8.0.20-1.el7.x86_64--> Running transaction check---> Package mysql-community-client.x86_64 0:8.0.20-1.el7 will be installed--> Processing Dependency: mysql-community-libs(x86-64) >= 8.0.11 for package: mysql-community-client-8.0.20-1.el7.x86_64---> Package mysql-community-common.x86_64 0:8.0.20-1.el7 will be installed--> Running transaction check---> Package mariadb-libs.x86_64 1:5.5.65-1.el7 will be obsoleted--> Processing Dependency: libmysqlclient.so.18()(64bit) for package: 2:postfix-2.10.1-9.el7.x86_64--> Processing Dependency: libmysqlclient.so.18(libmysqlclient_18)(64bit) for package: 2:postfix-2.10.1-9.el7.x86_64---> Package mysql-community-libs.x86_64 0:8.0.20-1.el7 will be obsoleting--> Running transaction check---> Package mysql-community-libs-compat.x86_64 0:8.0.20-1.el7 will be obsoleting--> Finished Dependency Resolution Dependencies Resolved =============================================================================================== Package ArchVersionRepositorySize===============================================================================================Installing: mysql-community-libsx86_648.0.20-1.el7mysql80-community4.5 Mreplacing mariadb-libs.x86_64 1:5.5.65-1.el7 mysql-community-libs-compatx86_648.0.20-1.el7mysql80-community1.2 Mreplacing mariadb-libs.x86_64 1:5.5.65-1.el7 mysql-community-server x86_648.0.20-1.el7mysql80-community488 MInstalling for dependencies: mysql-community-client x86_648.0.20-1.el7mysql80-community47 M mysql-community-common x86_648.0.20-1.el7mysql80-community609 k Transaction Summary===============================================================================================Install 3 Packages (+2 Dependent packages) Total download size: 541 MIs this ok [y/d/N]: yDownloading packages:warning: /var/cache/yum/x86_64/7/mysql80-community/packages/mysql-community-common-8.0.20-1.el7.x86_64.rpm: Header V3 DSA/SHA1 Signature, key ID 5072e1f5: NOKEYPublic key for mysql-community-common-8.0.20-1.el7.x86_64.rpm is not installed(1/5): mysql-community-common-8.0.20-1.el7.x86_64.rpm | 609 kB 00:00:00(2/5): mysql-community-libs-8.0.20-1.el7.x86_64.rpm| 4.5 MB 00:00:13(3/5): mysql-community-libs-compat-8.0.20-1.el7.x86_64.rpm| 1.2 MB 00:00:04mysql-community-client-8.0.20- FAILED B 00:22:23 ETA http://repo.mysql.com/yum/mysql-8.0-community/el/7/x86_64/mysql-community-client-8.0.20-1.el7.x86_64.rpm: [Errno 12] Timeout on http://repo.mysql.com/yum/mysql-8.0-community/el/7/x86_64/mysql-community-client-8.0.20-1.el7.x86_64.rpm: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds')Trying other mirror.(4/5): mysql-community-server-8.0.20-1.el7.x86_64.rpm | 488 MB 00:22:18(5/5): mysql-community-client-8.0.20-1.el7.x86_64.rpm | 47 MB 00:01:57-----------------------------------------------------------------------------------------------Total 376 kB/s | 541 MB 00:24:34Retrieving key from file:///etc/pki/rpm-gpg/RPM-GPG-KEY-mysqlImporting GPG key 0x5072E1F5: Userid: "MySQL Release Engineering <mysql-build@oss.oracle.com>" Fingerprint: a4a9 4068 76fc bd3c 4567 70c8 8c71 8d3b 5072 e1f5 Package : mysql80-community-release-el7-3.noarch (installed) From: /etc/pki/rpm-gpg/RPM-GPG-KEY-mysqlIs this ok [y/N]: y Running transaction checkRunning transaction testTransaction test succeededRunning transactionWarning: RPMDB altered outside of yum. Installing : mysql-community-common-8.0.20-1.el7.x86_64 1/6Installing : mysql-community-libs-8.0.20-1.el7.x86_64 2/6Installing : mysql-community-client-8.0.20-1.el7.x86_64 3/6Installing : mysql-community-server-8.0.20-1.el7.x86_64 4/6Installing : mysql-community-libs-compat-8.0.20-1.el7.x86_645/6Erasing : 1:mariadb-libs-5.5.65-1.el7.x86_64 6/6Verifying : mysql-community-libs-compat-8.0.20-1.el7.x86_641/6Verifying : mysql-community-common-8.0.20-1.el7.x86_64 2/6Verifying : mysql-community-server-8.0.20-1.el7.x86_64 3/6Verifying : mysql-community-client-8.0.20-1.el7.x86_64 4/6Verifying : mysql-community-libs-8.0.20-1.el7.x86_64 5/6Verifying : 1:mariadb-libs-5.5.65-1.el7.x86_64 6/6Installed: mysql-community-libs.x86_64 0:8.0.20-1.el7mysql-community-libs-compat.x86_64 0:8.0.20-1.el7mysql-community-server.x86_64 0:8.0.20-1.el7Dependency Installed: mysql-community-client.x86_64 0:8.0.20-1.el7 mysql-community-common.x86_64 0:8.0.20-1.el7Replaced: mariadb-libs.x86_64 1:5.5.65-1.el7Complete!

安装完成后就会覆盖掉之前的mariadb

二、配置Mysql数据库

启动MySQL

systemctl start mysqld.service

查看MySQL运行状态

systemctl status mysqld.service

● mysqld.service - MySQL Server Loaded: loaded (/usr/lib/systemd/system/mysqld.service; enabled; vendor preset: disabled) Active: active (running) since Wed 2020-05-13 23:57:41 HKT; 18s agoDocs: man:mysqld(8) http://dev.mysql.com/doc/refman/en/using-systemd.html Process: 9563 ExecStartPre=/usr/bin/mysqld_pre_systemd (code=exited, status=0/SUCCESS) Main PID: 9649 (mysqld) Status: "Server is operational" Tasks: 39 CGroup: /system.slice/mysqld.service └─9649 /usr/sbin/mysqld May 13 23:57:34 CentOS.highning.com systemd[1]: Starting MySQL Server...May 13 23:57:41 CentOS.highning.com systemd[1]: Started MySQL Server.

找出root初始密码

grep "password" /var/log/mysqld.log

2020-05-13T15:57:37.815353Z 6 [Note] [MY-010454] [Server] A temporary password is generated for root@localhost: 9*CxxNRWHqmL

进入数据库：

mysql -uroot -p

输入密码（密码是上面查询到的 ,/wsw6gif;eH ），此时不能操作数据库，必须修改密码之后才能操作数据库

ALTER USER 'root'@'localhost' IDENTIFIED BY 'new password';

其中‘new password'替换成你要设置的密码，注意:密码设置必须要大小写字母数字和特殊符号（,/';:等）,不然不能配置成功

三、开启mysql的远程访问

执行以下命令开启远程访问限制（注意：下面命令开启的IP是 192.168.0.1，如要开启所有的，用%代替IP）,mysql8.0和以前的版本不一样，不能用原来的命令同时授权和创建用户：

create user 'root'@'192.168.0.1' identified by 'password';grant all privileges on *.* to 'root'@'192.168.0.1' with grant option;

再输入以下两行命令

flush privileges;exit

四、为firewalld添加开放端口

添加mysql端口3306和Tomcat端口8080

firewall-cmd --zone=public --add-port=3306/tcp --permanent firewall-cmd --zone=public --add-port=8080/tcp --permanent

重新载入

firewall-cmd --reload

最后在windows下用mysql命令登录

Microsoft Windows [版本 10.0.18363.778](c) 2019 Microsoft Corporation。保留所有权利。 C:\Users\highning>mysql -h 192.168.88.88 -P 3306 -u root -pEnter password: ********Welcome to the MySQL monitor. Commands end with ; or \g.Your MySQL connection id is 10Server version: 8.0.20 MySQL Community Server - GPL Copyright (c) 2000, 2020, Oracle and/or its affiliates. All rights reserved. Oracle is a registered trademark of Oracle Corporation and/or itsaffiliates. Other names may be trademarks of their respectiveowners. Type 'help;' or '\h' for help. Type '\c' to clear the current input statement. mysql> show databases;+--------------------+| Database |+--------------------+| information_schema || mysql|| performance_schema || sys|+--------------------+4 rows in set (0.00 sec) mysql>

修改密码安全策略，改为LOW，密码长度最小6位

mysql> SHOW VARIABLES LIKE 'validate_password%';+--------------------------------------+--------+| Variable_name| Value |+--------------------------------------+--------+| validate_password.check_user_name | ON|| validate_password.dictionary_file ||| validate_password.length| 8|| validate_password.mixed_case_count | 1|| validate_password.number_count| 1|| validate_password.policy| MEDIUM || validate_password.special_char_count | 1|+--------------------------------------+--------+7 rows in set (0.00 sec) mysql> set global validate_password.policy=LOW;Query OK, 0 rows affected (0.00 sec) mysql> set global validate_password.length=6;Query OK, 0 rows affected (0.00 sec) mysql> SHOW VARIABLES LIKE 'validate_password%';+--------------------------------------+-------+| Variable_name| Value |+--------------------------------------+-------+| validate_password.check_user_name | ON || validate_password.dictionary_file ||| validate_password.length| 6|| validate_password.mixed_case_count | 1|| validate_password.number_count| 1|| validate_password.policy| LOW || validate_password.special_char_count | 1|+--------------------------------------+-------+7 rows in set (0.00 sec)

关于 mysql 密码策略相关参数；

1）、validate_password.length 固定密码的总长度；

2）、validate_password_dictionary_file 指定密码验证的文件路径；

3）、validate_password_mixed_case_count 整个密码中至少要包含大/小写字母的总个数；

4）、validate_password_number_count 整个密码中至少要包含阿拉伯数字的个数；

5）、validate_password.policy 指定密码的强度验证等级，默认为 MEDIUM；

6）、validate_password_special_char_count 整个密码中至少要包含特殊字符的个数；

关于 validate_password.policy 的取值：

LOW：只验证长度；

MEDIUM：验证长度、数字、大小写、特殊字符；

STRONG：验证长度、数字、大小写、特殊字符、字典文件；