【一】安装

【1.1】系统环境

系统环境：CentOS Linux release 7.6.1708 (Core)

系统内存：4G

系统内核：1

Python：3.6.4

关闭iptables and selinux

本次安装采用的是外部MySQL 5.7

【1.2】关闭iptables

[root@localhost ~]# systemctl stop firewalld.service//关闭iptables

[root@localhost ~]# systemctl disable firewalld.service//开机 禁止启动 iptables

【1.3】禁用selinux 以及安装 Python

[root@localhost ~]# vim /etc/sysconfig/selinux

# This file controls the state of SELinux on the system.

# SELINUX= can take one of these three values:

# enforcing - SELinux security policy is enforced.

# permissive - SELinux prints warnings instead of enforcing.

# disabled - No SELinux policy is loaded.

SELINUX=disabled// 改成 disabled

# SELINUXTYPE= can take one of three two values:

# targeted - Targeted processes are protected,

# minimum - Modification of targeted policy. Only selected processes are protected.

# mls - Multi Level Security protection.

SELINUXTYPE=targeted

【1.3.1】Python 安装

[root@localhost ~]# cd /root/software

[root@localhost software]# yum -y install zlib-*

[root@localhost software]# wget https://www.python.org/ftp/python/3.6.4/Python-3.6.4.tgz

[root@localhost software]# tar -zxvf Python-3.6.4.tgz

[root@localhost software]# mkdir -p /usr/local/python3

[root@localhost software]# cd Python-3.6.4/

[root@localhost Python-3.6.4]# ./configure --prefix=/usr/local/python3

[root@localhost Python-3.6.4]# make

[root@localhost Python-3.6.4]# make install

[root@localhost Python-3.6.4]# mv /usr/bin/python /usr/bin/python_bak//修改旧版本

[root@localhost Python-3.6.4]# ln -s /usr/local/python3/bin/python3 /usr/bin/python//创建新的软连接　　

[root@localhost Python-3.6.4]# python -V//检查python的版本

Python 3.6.4

[root@localhost Python-3.6.4]# vim ~/.bash_profile//配置成功后，pip3用不了，需要进一步配置将/usr/local/python3/bin加入PATH

# .bash_profile

# Get the aliases and functions

if [ -f ~/.bashrc ]; then

. ~/.bashrc

fi

# User specific environment and startup programs

PATH=$PATH:$HOME/bin:/usr/local/python3/bin

export PATH

[root@localhost Python-3.6.4]# source ~/.bash_profile// 让环境变量生效

【1.3.2】配置 yum 源否则 yum 不可用

[root@localhost Python-3.6.4]# yum -y update//显然上面的 except 是python2的写法，当然不能使用默认的Python3来执行了。于是把这个文件第1行的 #!/usr/bin/python 替换成 #!/usr/bin/python2.7

File "/usr/bin/yum", line 30

except KeyboardInterrupt, e:^

SyntaxError: invalid syntax

[root@localhost Python-3.6.4]# vim /usr/bin/yum

于是把这个文件第1行的 #!/usr/bin/python 替换成 #!/usr/bin/python2.7

【1.4】安装 MySQL

[root@localhost ~]# cd /etc/yum.repos.d/

[root@localhost yum.repos.d]# vim mysql.repos

[mysql5.7-community]

name=MySQL 5.7 Community Server

baseurl=http://repo.mysql.com/yum/mysql-5.7-community/el/7/$basearch/

enabled=1

gpgcheck=0

[root@localhost yum.repos.d]# yum -y install mysql-*//等待 安装 执行完成

【1.5】启动MySQL服务 以及 设置开机启动

[root@localhost yum.repos.d]# systemctl start mysqld

[root@localhost yum.repos.d]# systemctl enable mysqld

[root@localhost yum.repos.d]# systemctl daemon-reload

【1.6】查看 mysql 的初始密码

[root@localhost yum.repos.d]# grep 'temporary password' /var/log/mysqld.log

2019-06-25T03:27:20.334210Z 1 [Note] A temporary password is generated for root@localhost: GIutnKkR%7fe

【1.7】登录 mysql 环境做配置以及修改参数

[root@localhost yum.repos.d]# mysql -uroot -pGIutnKkR%7fe//回车进入数据库

mysql> set global validate_password_policy=0;

mysql> set global validate_password_length=1;

mysql> set global validate_password_mixed_case_count=2;

mysql> show variables like 'validate_password%';

+--------------------------------------+-------+

| Variable_name| Value |

+--------------------------------------+-------+

| validate_password_check_user_name| OFF|

| validate_password_dictionary_file||

| validate_password_length | 6 |

| validate_password_mixed_case_count| 2 |

| validate_password_number_count| 1 |

| validate_password_policy | LOW|

| validate_password_special_char_count | 1 |

+--------------------------------------+-------+

7 rows in set (0.02 sec)

mysql> alter user 'root'@'localhost' identified by '123456';

mysql> flush privileges;

mysql> quit;

【1.8】创建 Yearning 数据库 与 用户 和 密码 并且授权

[root@localhost yum.repos.d]# mysql -uroot -p123456

mysql> create database Yearning charset utf8;//创建 Yearning 库

mysql> create user 'Yearning'@'%' identified by 'Yearning';//创建 Yearning 用户

mysql> grant all on *.* to 'Yearning'@'%' identified by 'Yearning'; //授权 Yearning 用户权限

mysql> flush privileges;

mysql> quit;

【1.9】安装 docker

[root@localhost ~]# yum install -y yum-utils device-mapper-persistent-data lvm2//安装 docker 的依赖包

【1.9.1】设置yum源

[root@localhost ~]# yum-config-manager --add-repo https://download.docker.com/linux/centos/docker-ce.repo

【1.9.2】可以查看所有仓库中所有docker版本，并选择特定版本安装

[root@localhost ~]# yum list docker-ce --showduplicates | sort -r

已加载插件：fastestmirror, langpacks

已安装的软件包

可安装的软件包

* updates: ap.stykers.moe

Loading mirror speeds from cached hostfile

* extras: ftp.sjtu.edu.cn

docker-ce.x86_643:18.09.6-3.el7docker-ce-stable

docker-ce.x86_643:18.09.6-3.el7@docker-ce-stable

docker-ce.x86_643:18.09.5-3.el7docker-ce-stable

docker-ce.x86_643:18.09.4-3.el7docker-ce-stable

docker-ce.x86_643:18.09.3-3.el7docker-ce-stable

docker-ce.x86_643:18.09.2-3.el7docker-ce-stable

docker-ce.x86_643:18.09.1-3.el7docker-ce-stable

docker-ce.x86_643:18.09.0-3.el7docker-ce-stable

docker-ce.x86_6418.06.3.ce-3.el7docker-ce-stable

docker-ce.x86_6418.06.2.ce-3.el7docker-ce-stable

docker-ce.x86_6418.06.1.ce-3.el7docker-ce-stable

docker-ce.x86_6418.06.0.ce-3.el7docker-ce-stable

docker-ce.x86_6418.03.1.ce-1.el7.centosdocker-ce-stable

docker-ce.x86_6418.03.0.ce-1.el7.centosdocker-ce-stable

docker-ce.x86_6417.12.1.ce-1.el7.centosdocker-ce-stable

docker-ce.x86_6417.12.0.ce-1.el7.centosdocker-ce-stable

docker-ce.x86_6417.09.1.ce-1.el7.centosdocker-ce-stable

docker-ce.x86_6417.09.0.ce-1.el7.centosdocker-ce-stable

docker-ce.x86_6417.06.2.ce-1.el7.centosdocker-ce-stable

docker-ce.x86_6417.06.1.ce-1.el7.centosdocker-ce-stable

docker-ce.x86_6417.06.0.ce-1.el7.centosdocker-ce-stable

docker-ce.x86_6417.03.3.ce-1.el7docker-ce-stable

docker-ce.x86_6417.03.2.ce-1.el7.centosdocker-ce-stable

docker-ce.x86_6417.03.1.ce-1.el7.centosdocker-ce-stable

docker-ce.x86_6417.03.0.ce-1.el7.centosdocker-ce-stable

* base: ap.stykers.moe

【1.9.3】安装 docker 选择对应的版本

[root@localhost ~]# yum install docker-ce #由于repo中默认只开启stable仓库，故这里安装的是最新稳定版18.03.1.ce

[root@localhost ~]# yum install <FQPN> # 例如：yum install docker-ce-18.03.1.ce

[root@localhost ~]# yum install -y docker-ce-18.03.1.ce//等待安装完成

【1.9.4】启动并加入开机启动

[root@localhost ~]# systemctl start docker

[root@localhost ~]# systemctl enable docker

【1.9.5】验证安装是否成功(有client和service两部分表示docker安装启动都成功了)

[root@localhost ~]# docker version

Client:

Version:18.09.6

API version:1.39

Go version:go1.10.8

Git commit:481bc77156

Built: Sat May 4 02:34:58 2019

OS/Arch:linux/amd64

Experimental: false

Server: Docker Engine - Community

Engine:

Version: 18.09.6

API version: 1.39 (minimum version 1.12)

Go version:go1.10.8

Git commit:481bc77

Built:Sat May 4 02:02:43 2019

OS/Arch: linux/amd64

Experimental: false

【二】Inception 及 Yearning安装

【2.1】下载 Yearning 源码

[root@localhost ~]# mkdir -p /root/software

[root@localhost ~]# cd /root/software

[root@localhost software]# git clone https://github.com/cookieY/Yearning.git//获取 git Yearning 源码

[root@localhost software]# cd Yearning/install/yearning-docker-compose/init-sql// 进入 环境 变量下边去

[root@localhost init-sql]# mysql -uYearning -pYearning Yearning < install.sql// 导入 环境变量到数据库里面去

[root@localhost ~]# cd /root/software/Yearning/install/// cd 到环境目录 解压 inception.tar 包

[root@localhost install]# tar -xvf inception.tar

[root@localhost install]# cd inception/bin/

[root@localhost bin]# mkdir -p /var/log/inception/// 创建 inception 日志目录

[root@localhost bin]# mkdir -p /var/run/inception/// 创建 inception.socket 目录

[root@localhost bin]# vim inc.cnf// 修改 inception 配置文件

[inception]

general_log=1

general_log_file=/var/log/inception/inception.log// inception 日志目录

port=6669

socket=/var/run/inception/inc.socket// inception.socket 存储目录

character-set-client-handshake=0

character-set-server=utf8

inception_support_charset=utf8mb4

inception_enable_nullable=0

inception_check_primary_key=1

inception_check_column_comment=1

inception_check_table_comment=1

inception_enable_blob_type=1

inception_check_column_default_value=1

inception_support_charset=utf8

inception_osc_on=OFF

inception_check_column_default_value=OFF

inception_check_column_comment=OFF

inception_check_table_comment=OFF

inception_enable_identifer_keyword=ON

inception_remote_backup_host = 192.168.1.150// 备份数据库的 IP

inception_remote_backup_port = 3306// 数据库默认端口

inception_remote_system_user = root// 数据库的权限用户_可根据自己定义

inception_remote_system_password = 123456// 数据库的用户密码

【2.2】启动 inception 服务

[root@localhost bin]# pwd

/root/software/Yearning/install/inception/bin

[root@localhost bin]# nohup bin/Inception --defaults-file=inc.cnf &// 后台调度启用

【2.3】运行 Yearning【备注：HOST=本机IP 与 MYSQL_ADDR=本机IP 后面的参数只要是按照本文操作可以不用选择。默认按照我的就行了】

[root@localhost bin]# docker run -d -e HOST=192.168.1.150 -e MYSQL_ADDR=192.168.1.150 -e MYSQL_USER=Yearning -e MYSQL_PASSWORD=Yearning -p8080:80 -p8000:8000 registry.cn-hangzhou.aliyuncs.com/cookie/yearning:v1.3.0

【三】相关配置

【3.1】访问 Yearning

访问Yearning(访问地址为你启动docker的IP地址)

登录管理员缺省值：admin / Yearning_admin